Author [ES] [CA] [PL] [PT] [IT] [DE] [FR] [NL] [DK] [NO] [GR] [TR] Topic: Brand new Gen III - TSAS Fault  (Read 1243 times)

0 Members and 1 Guest are viewing this topic.

Offline flyboy52219

  • Explorer Junior
  • *
  • Topic Author
  • Posts: 10
  • Bike: 2018 Tiger XCA
  • City / Town: Shelby Twp.
  • Country: USA
Brand new Gen III - TSAS Fault
« on: April 30, 2019, 10:13:32 PM »
Hey all - brought my new 2018 XCA home from the dealer that's three hours away...one longer ride on Sunday and a few short ones. Love the bike but I am getting a TSAS Fault Message when I pull away on every ride. I press the √ to acknowledge and continue on. Able to switch modes...able to adjust damping...I did try disconnecting the battery as a few have suggested but same issues still pops up. Any other thoughts on what could be wrong? Trying to eliminate the possibility of user error too so wanted to see what the group had. Cheers!

Offline Icy

  • Explorer Master
  • ****
  • Posts: 2197
  • Stationary Traveler
  • Bike: 2018 TEX XCx
  • City / Town: Bronxville
  • Country: USA
Re: Brand new Gen III - TSAS Fault
« Reply #1 on: April 30, 2019, 10:38:43 PM »
Just a thought: why don't you stop by the dealer and ask them to take a look? That's what I would do...
"It's easy to learn how to speak, it takes a lot more to learn how to actually say something." ~Icy
http://instagram.com/soksa.icy/
http://www.flickr.com/photos/soksa/
https://www.youtube.com/user/SokSa/videos
http://www.swordclassri.com/

Offline Hawkeye

  • Explorer Master
  • ****
  • Posts: 850
  • Bike: Explorer XRx Low
  • City / Town: Billericay
  • Country: England
Re: Brand new Gen III - TSAS Fault
« Reply #2 on: April 30, 2019, 11:11:20 PM »
Have you tried to re-calibrate it as per the handbook? I had this issue on my Gen-2 after they updated the chassis software, re-calibrating it cleared it.

Excerpt from manual:

To allow the system to calibrate correctly, the following procedure must be adhered to:
• Turn the ignition on. Do not start the engine.
• Wait for the warning light to stop flashing indicating that adjustment motor calibration is complete.
• Start the engine. If the warning light resumes flashing the adjustment motors are being recalibrated due to low battery voltage.
• Wait for the warning light to stop flashing before riding the motorcycle.
Failure to follow this procedure will cause the recalibration to be halted and the warning light to remain lit.
In this case the warning light will extinguish once the recalibration is next allowed to complete.
« Last Edit: April 30, 2019, 11:15:21 PM by Hawkeye »

Offline flyboy52219

  • Explorer Junior
  • *
  • Topic Author
  • Posts: 10
  • Bike: 2018 Tiger XCA
  • City / Town: Shelby Twp.
  • Country: USA
Re: Brand new Gen III - TSAS Fault
« Reply #3 on: April 30, 2019, 11:37:28 PM »
tried the recalibration...no luck...just occurs again on a short ride...seems when I hit second gear or ride for 20 seconds.

Offline eps

  • Explorer Pro
  • ***
  • Posts: 249
  • Bike: 2012 Tiger 1200
  • City / Town: Preston
  • Country: UK
Re: Brand new Gen III - TSAS Fault
« Reply #4 on: May 01, 2019, 10:46:10 PM »
Bring back to dealer - you paid good money for it - let them sort it - best of luck  :021:

Offline FredJ9

  • Explorer Pro
  • ***
  • Posts: 474
  • Bike: ‘15 Explorer
  • City / Town: Bakersfield, Ca
  • Country: USA
Re: Brand new Gen III - TSAS Fault
« Reply #5 on: May 03, 2019, 02:57:00 PM »
Six hour round trip to the dealership!! This is why I only buy from a local dealership.
Maybe when I retire and have plenty of time on my hands I’ll explore other possibilities but I doubt it.
Definitely see why you’re looking for answers before making that commitment.
Maybe set guaranteed appointment so you won’t need to go back a second time.

Offline flyboy52219

  • Explorer Junior
  • *
  • Topic Author
  • Posts: 10
  • Bike: 2018 Tiger XCA
  • City / Town: Shelby Twp.
  • Country: USA
Re: Brand new Gen III - TSAS Fault
« Reply #6 on: June 26, 2019, 01:42:00 PM »
Update - local dealer did my first service...did state the rear sensor needed a reset. So far no more TSAS codes. Loving the bike!

 


Recent Topics

nonskid