Author [ES] [CA] [PL] [PT] [IT] [DE] [FR] [NL] [DK] [NO] [GR] [TR] Topic: Electric connection to OEM pannier  (Read 1711 times)

0 Members and 1 Guest are viewing this topic.

Offline ExRider

  • Explorer Member
  • **
  • Posts: 16
  • Bike: 2020 Tiger 1200 XCA
  • City / Town: Nittedal
  • Country: Norway
Re: Electric connection to OEM pannier
« Reply #10 on: November 05, 2019, 03:14:03 PM »
Have a look at Magcode or Amphenol Stingray connectors

Offline NiK

  • Explorer God
  • *****
  • Posts: 4523
  • Bike: Red Skin Mk3
  • City / Town: Marseille
  • Country: France
Re: Electric connection to OEM pannier
« Reply #11 on: November 06, 2019, 09:31:59 AM »
Clever find!
I ultimately discarded such fast easy weatherproof connectors though, as I need more than 2 pins (+, GND, Brake signal, maybe indicators one of these days ;-).

Offline ExRider

  • Explorer Member
  • **
  • Posts: 16
  • Bike: 2020 Tiger 1200 XCA
  • City / Town: Nittedal
  • Country: Norway
Re: Electric connection to OEM pannier
« Reply #12 on: November 06, 2019, 04:54:19 PM »
I've used the Magcode connector on a previous TDM850 with the  "female" mounted on the bike, connected to the battery and the "male" on the battery charger.
Have not tested the Stingray (which is nine pin) yet

Offline Mtlben

  • Explorer Junior
  • *
  • Topic Author
  • Posts: 10
  • Bike: Gen3 XRT
  • City / Town: Montreal area
  • Country: Canada
Re: Electric connection to OEM pannier
« Reply #13 on: November 21, 2019, 06:06:53 PM »
At the end, I placed an order for these IP-68 rated connectors:

An M12, 4 pins panel-mount connector with 1m cable pre-soldered:
https://www.elecbee.com/en/m12-panel-receptacles/2209-m12-connector-4pin-female-bulkhead-a-coded-waterproof-straight-shiled-panel-mount-receptacle-with-wires-1m-awg22.html

A mating M4, 4 pins right-angle connector with a 2m cable:
https://www.elecbee.com/en/m12-cable-cordsets/2521-m12-male-elbow-4-pin-right-angle-aviation-connector-electrical-cable-2m-awg22-a-code-unshield.html

The rated current is 1.5A, but by spreading the + and gnd over 2 connectors each I should be OK.

We will see how it turns out.


...Ben...
...Ben...

Offline JohnCFI

  • Explorer Member
  • **
  • Posts: 28
  • Desire the Right... to ride
  • Bike: Tiger 1200 XCx
  • City / Town: Stanley
  • Country: Falkland Islands
Re: Electric connection to OEM pannier
« Reply #14 on: November 22, 2019, 10:15:34 AM »
 :460:  Thanks Ben, Great find.  Following with great interest.....
John Clifford
Stanley
Falkland Islands

 


Recent Topics


nonskid