Author Topic: Replacement screen  (Read 261 times)

0 Members and 1 Guest are viewing this topic.

Offline pinskip

  • Explorer Junior
  • *
  • Topic Author
  • Posts: 2
  • Bike: Tiger 1200 XRT
  • City / Town: Yeovil
  • Country: gb
Replacement screen
on: October 12, 2020, 03:05:51 PM
Hello there, I have recently acquired a tiger 1200 XRT 2018 model and the standard screen has seen better days with stone chips and scratches etc. I was looking into a replacement and have looked at the Powerbronze and Puig screens which seem quite suitable. I was wondering what it is considered a good replacement for the standard screen with similar dimensions ? Any help or advise would be greatly appreciated. Thanks.

#1

Online XCaTel

  • Explorer Master
  • ****
  • Posts: 1537
  • Bike: 2018 T12 & 1995 D12
  • City / Town: County Kildare
  • Country: ie
Re: Replacement screen
Reply #1 on: October 12, 2020, 03:39:15 PM
Hi pinskip, use the forum search tool with key words, e.g. Puig. You will find a good few posts on replacement screens along with pictures. I think Puig come pretty well high up on the list. If you see a reference to Gen 3 that's your bike, assuming it has an LCD dash. (The only 2018 and on model without a TFT is the entry level XR). You should find a good bit of info.

#2

Offline pinskip

  • Explorer Junior
  • *
  • Topic Author
  • Posts: 2
  • Bike: Tiger 1200 XRT
  • City / Town: Yeovil
  • Country: gb
Re: Replacement screen
Reply #2 on: October 12, 2020, 03:43:37 PM
Thank you very much for your reply and help. I will do that, thanks again.