Author Bike dying when you are slowing down to stop  (Read 9904 times)

0 Members and 1 Guest are viewing this topic.

  • Offline JG_XRT   us

    • Explorer Master  ‐    593
    • ****
      #30

    Offline JG_XRT

    • Explorer Master
    • ****
    • Posts: 593
    • Up the Irons!
    • Bike: 2017 XRt
    • City / Town: Battle Creek, MI
    • Country: us
    Re: Bike dying when you are slowing down to stop
    Reply #30 on: July 07, 2022, 11:43:48 pm
    July 07, 2022, 11:43:48 pm
    *Originally Posted by jjscsix [+]

    I’ve also found that using the clutch to disengage the cruise control does not work well. 


    I think this is the case for all generations of this bike.

    On my Gen 2, the best way to disengage the cruise is to roll the throttle forward slightly.  Turns the cruise off instantly.
    So many roads, so little time.

  • Online pahiker   us

    • Explorer Member  ‐    27
    • **
      #31

    Online pahiker

    • Explorer Member
    • **
    • Posts: 27
    • Bike: Tiger 1200 GT Pro
    • Country: us
    Re: Bike dying when you are slowing down to stop
    Reply #31 on: July 08, 2022, 01:40:37 am
    July 08, 2022, 01:40:37 am
    Add me to the club. 722 miles, I was slowing for a stop sign, clutch pulled in and in 1st gear when it stalled just before I stopped. My T900 had 4 stalling occurrences, 2 when stopped and cracking the throttle to take off and 2 when in 3rd or 4th gear about 35mph under low load when it died. My T1200 has quick shifter and hill holder disabled, was hoping that may be a way to prevent it. Otherwise a fine motorcycle, it's a shame Triumph can't get a handle on this.
    2009 Suzuki DR 650
    2023 Triumph Tiger 1200 GT Pro

  • Offline wassers   gb

    • Explorer Member  ‐    73
    • **
      #32

    Offline wassers

    • Explorer Member
    • **
    • Posts: 73
    • Bike: GT Explorer & ST
    • City / Town: SANDHURST
    • Country: gb
    Re: Bike dying when you are slowing down to stop
    Reply #32 on: July 08, 2022, 10:50:37 am
    July 08, 2022, 10:50:37 am
    I took my brand new GT Explorer out last night on its very first ride.

    It stalled twice when slowing down to a stop with the clutch pulled in. This happened within the first half mile of leaving my house. I did 60 miles in total that evening and it didnt happen again  :087:

    Interestingly, I had the same thing happen on my new Triumph Thruxton R a few years back and that was fixed after an ECU flash from my dealer. Could it be needing something similar  :027:

    There is obviously an issue as many of us are reporting the same thing, so will be interesting to see how Triumph respond  :003:

    It didnt spoil my enjoyment of riding my new Tiger for the first time though.... absolutely loved it.

     


  • Offline Sunny2020   us

    • Explorer Pro  ‐    115
    • ***
      #33

    Offline Sunny2020

    • Explorer Pro
    • ***
    • Posts: 115
    • Bike: Tiger 1200RE
    • City / Town: Chicago
    • Country: us
    Re: Bike dying when you are slowing down to stop
    Reply #33 on: July 08, 2022, 02:14:55 pm
    July 08, 2022, 02:14:55 pm
    A flash seems like the most likely fix for this.  If it were a mechanical problem I don’t think it would be so intermittent and infrequent. 

  • Offline jjscsix   us

    • Explorer Pro  ‐    133
    • ***
    • Topic Author
    • #34

    Offline jjscsix

    • Explorer Pro
    • ***
    • Topic Author
    • Posts: 133
    • Bike: Tiger 1200
    • City / Town: Texas
    • Country: us
    Re: Bike dying when you are slowing down to stop
    Reply #34 on: July 08, 2022, 10:34:10 pm
    July 08, 2022, 10:34:10 pm
    Since having mine flashed two days ago during my 600 mile service I have put almost 500 miles on the bike and it has not stalled.  It has had plenty of opportunities.  And this is with two different riders riding it.  A very good friend of mine put about 50 miles on it today.  He rode a dealer bike about six weeks ago and it stalled every time he came up to a stop. Mine did not die on him either today.

    Fingers and toes crossed!
    Jim
    2023 Tiger 1200 GT Explorer
    2020 Ninja 1000 SX
    2018 CBR 1000RR

  • Offline BriansTiger   us

    • Explorer Member  ‐    45
    • **
      #35

    Offline BriansTiger

    • Explorer Member
    • **
    • Posts: 45
    • Bike: '23 Tiger 1200 GT Ex
    • City / Town: West Linn, Or. USA
    • Country: us
    Re: Bike dying when you are slowing down to stop
    Reply #35 on: July 09, 2022, 08:02:59 pm
    July 09, 2022, 08:02:59 pm
    Well dang! Add me to the list. This morning at the Stop sign, first gear, pulled in clutch, she just died without a wimper. Started right back up and away we went. Bikes getting serviced this afternoon, so we’ll see if any codes pop up.

  • Offline jjscsix   us

    • Explorer Pro  ‐    133
    • ***
    • Topic Author
    • #36

    Offline jjscsix

    • Explorer Pro
    • ***
    • Topic Author
    • Posts: 133
    • Bike: Tiger 1200
    • City / Town: Texas
    • Country: us
    Re: Bike dying when you are slowing down to stop
    Reply #36 on: July 11, 2022, 07:52:55 pm
    July 11, 2022, 07:52:55 pm
    Mine did it once today in classic fashion.  I was coming to a stop downshifting through the gears.  I’d guess about 5mph with clutch pulled all the way in about I when downshifted to first it just died.  I tried six more times to duplicate the same conditions shortly after that and it did not die again.
    Jim
    2023 Tiger 1200 GT Explorer
    2020 Ninja 1000 SX
    2018 CBR 1000RR

  • Offline BykerBoyDes   gb

    • Explorer Junior  ‐    7
    • *
      #37

    Offline BykerBoyDes

    • Explorer Junior
    • *
    • Posts: 7
    • Bike: Tiger 1200 GT Exp
    • City / Town: Preston
    • Country: gb
    Re: Bike dying when you are slowing down to stop
    Reply #37 on: July 11, 2022, 09:03:40 pm
    July 11, 2022, 09:03:40 pm
    So Jim, is this a stall again after the ECU Flash? Just asking as mine goes into the Triumph dealer Thursday to look at this.

  • Offline Sunny2020   us

    • Explorer Pro  ‐    115
    • ***
      #38

    Offline Sunny2020

    • Explorer Pro
    • ***
    • Posts: 115
    • Bike: Tiger 1200RE
    • City / Town: Chicago
    • Country: us
    Re: Bike dying when you are slowing down to stop
    Reply #38 on: July 11, 2022, 09:28:40 pm
    July 11, 2022, 09:28:40 pm
    Mine is going in Tomorrow, new tires being put on.  Will be asking for an update.   Though in 400 miles I’ve only had it happen 3 times, not in the last 100.   My issue is the weird tiny blip every time it crosses 3k.  Every time.  In gear.
    Last Edit: July 11, 2022, 09:31:25 pm by Sunny2020

  • Offline jjscsix   us

    • Explorer Pro  ‐    133
    • ***
    • Topic Author
    • #39

    Offline jjscsix

    • Explorer Pro
    • ***
    • Topic Author
    • Posts: 133
    • Bike: Tiger 1200
    • City / Town: Texas
    • Country: us
    Re: Bike dying when you are slowing down to stop
    Reply #39 on: July 11, 2022, 09:42:19 pm
    July 11, 2022, 09:42:19 pm
    Yes, after the update.  I rode about 550 miles after the update without a stall until this morning.  While the trend seems encouraging, the problem is not fixed. I look forward to seeing what your dealers say.
    Jim
    2023 Tiger 1200 GT Explorer
    2020 Ninja 1000 SX
    2018 CBR 1000RR

     



    nonskid