Bike dying when you are slowing down to stop

[Whippet]

It’s happened to me once at 235 miles. I’m now on 850 and it’s not happened again.  Doing another 1,000 miles in the next week, so we shall see.

[jjscsix]

I rode 100 miles today with the quickshifter turned off. The bike did not stall at all, and the bike shifted much better when using the clutch with the quickshifter off than it does with the quick shifter on. I will ride it a few more times before my 600 service next week. But it sure looks like the stalling is tied to the quickshifter. If so, could be linkage adjustment or ECU fix. I’m encouraged!

[GvG]

This guy also mentioned it at 28.55

&t=19s

BTW, great review 

[T1200GTE]

Originally Posted by jjscsix

I rode 100 miles today with the quickshifter turned off. The bike did not stall at all, and the bike shifted much better when using the clutch with the quickshifter off than it does with the quick shifter on. I will ride it a few more times before my 600 service next week. But it sure looks like the stalling is tied to the quickshifter. If so, could be linkage adjustment or ECU fix. I’m encouraged!

Interesting! Please keep us updated.

[jjscsix]

Will do. 

[Ninja]

Originally Posted by GvG

This guy also mentioned it at 28.55

&t=19s

BTW, great review 

Pretty complimentary review, his comment was to do with low RPM stalling, not sure if he was claiming it to be the same thing as described here or not however he did say it was not uncommon with other modern bikes, is this sensitive throttle modulation that he is describing,. I've never ran across this with the T1200 or any other modern bike I've road tested and not sure if my other two bike qualify in the category however I've never experienced this stalling for any reason,. I would regard it as quite unsafe if it should happen when the bike is leaned over and loses power,,!!

[Sunny2020]

It has happened to me 3 times in 300 miles.  Clutch in at about 3-4k when downshifting to a full stop.  Just drops all the way to off.  Clutch all the way in the whole time.

[jjscsix]

Originally Posted by Sunny2020

It has happened to me 3 times in 300 miles.  Clutch in at about 3-4k when downshifting to a full stop.  Just drops all the way to off.  Clutch all the way in the whole time.

Thanks. I noticed today several times when pulling the clutch in how the RPMs would drop to about 1,000 then fluctuate up and down quite a bit for several seconds on its own. 

[Tab90925]

I got my rally pro back today after a gear position sensor swap. Had the stalling issues when taking it in. After resetting codes and swapping the sensor, so far neither the tech or myself can get it to stall.

I don’t think the sensor has anything to do with it but I’m happy the bike made it home considering last time I rode it the bike stalled 5 times

[Sunny2020]

I can’t make it do it, it has just happened.  Not in the last 100 miles.