1   Go Down

Author has anybody replaced the bars on the explorer  (Read 382 times)

0 Members and 1 Guest are viewing this topic.

    • Offline Lucky_Strike   us

    • Explorer Junior  ‐    5
    • *
    • Topic Author

    Offline Lucky_Strike

    • Explorer Junior
    • *
    • Topic Author
    • Posts: 5
    • Bike: G4 Tiger 1200
    • City / Town: Shepherdsville
    • Country: us
    has anybody replaced the bars on the explorer
    on: March 17, 2023, 02:18:47 pm
    March 17, 2023, 02:18:47 pm
    so i have rotated the bars forward for off-roading and am finding the bed is just wrong. has anyone replaced the bars on these yet?
    		•

    Offline jjscsix   us

    • Explorer Pro  ‐    226
    • ***
      #1

    Offline jjscsix

    • Explorer Pro
    • ***
    • Posts: 226
    • Bike: Tiger 1200
    • City / Town: Texas
    • Country: us
    Re: has anybody replaced the bars on the explorer
    Reply #1 on: March 17, 2023, 04:45:51 pm
    March 17, 2023, 04:45:51 pm
    I would like to replace them or even just cut an inch off the ends.  The reason I have not is that two holes will have to be drilled on each end for the heated grip wires to go through.  Just more of a hassle than I want right now.
    Jim
    2023 Tiger 1200 GT Explorer
    2020 Ninja 1000 SX
    2018 CBR 1000RR
    		•

    Offline 1675   gb

    • Explorer Member  ‐    41
    • **
      #2

    Offline 1675

    • Explorer Member
    • **
    • Posts: 41
    • Bike: GT Explorer
    • City / Town: Spennymoor
    • Country: gb
    Re: has anybody replaced the bars on the explorer
    Reply #2 on: March 18, 2023, 02:56:51 pm
    March 18, 2023, 02:56:51 pm
    Don't know about the bars on other models, but I had to move them back slightly on my GT Explorer as they touched the screen on full lock.
    1   Go Up
     


    Recent Topics


    nonskid